deep ploughing-manufacture,factory,supplier from China

(Total 24 Products for deep ploughing)
PRODUCTS PARAMETERAgriculture machinery equipment furrow plough Mouldboard plough for tractor 1L series agriculture furrow mouldboard plough is attached to four-wheel tractor, mainly used for ploughing loam, the sand loam, cultivated and dry land. l Ploughing efficiency is perfect, The ground is flat after ploughing  l Simple structure and easy maintenancel The width of tractor plow share can be 25cm, 30cm, 35cm.l Material of plough tip is 65Mn steell Working depth could be easily adjusted by the depth roller  ModelNo.s of bottomWorki
  Contact Now
This subsoiler is an automatic agricultural machinery with various functions. Made up of frame, pole, plow share, soil separating board, leading bogie and strengthening tie bar. It can be installed on the left beam between the front and rear wheel. With adjustable ridge distance, automatic plow share and controllable depth; applicable for deep loosening of land and breaking up clods, matchable with seeding machine; with small turning radius, especially suitable for slope.
  Contact Now
3Z cultivator is suitable for cultivating corn, cotton, soybean, sugar beet, etc. It can perform cultivating, ditching, riding, deep loosing, etc. The rotary cultivator can break the harden soil, loose soil, and keep the underground water of soil, and clean the stubble of crop. This cultivating machine  is rational structure. It is safe, durable, and high efficiency. Modelunit3Z-23Z-33Z-43Z-5Working widthmm1100190029003700Working depthmm100-200No.
  Contact Now
This subsoiler is an automatic agricultural machinery with various functions. Made up of frame, pole, plow share, soil separating board, leading bogie and strengthening tie bar. It can be installed on the left beam between the front and rear wheel. With adjustable ridge distance, automatic plow share and controllable depth; applicable for deep loosening of land and breaking up clods, matchable with seeding machine; with small turning radius, especially suitable for slope.
  Contact Now
3Z cultivator is suitable for cultivating corn, cotton, soybean, sugar beet, etc. It can perform cultivating, ditching, riding, deep loosing, etc. The rotary cultivator can break the harden soil, loose soil, and keep the underground water of soil, and clean the stubble of crop. This cultivating machine  is rational structure. It is safe, durable, and high efficiency. Modelunit3Z-23Z-33Z-43Z-5Working widthmm1100190029003700Working depthmm100-200No.
  Contact Now
3Z cultivator is suitable for cultivating corn, cotton, soybean, sugar beet, etc. It can perform cultivating, ditching, riding, deep loosing, etc. The rotary cultivator can break the harden soil, loose soil, and keep the underground water of soil, and clean the stubble of crop. This cultivating machine  is rational structure. It is safe, durable, and high efficiency. Modelunit3Z-23Z-33Z-43Z-5Working widthmm1100190029003700Working depthmm100-200No.
  Contact Now
3Z cultivator is suitable for cultivating corn, cotton, soybean, sugar beet, etc. It can perform cultivating, ditching, riding, deep loosing, etc. The rotary cultivator can break the harden soil, loose soil, and keep the underground water of soil, and clean the stubble of crop. This cultivating machine  is rational structure. It is safe, durable, and high efficiency. Modelunit3Z-23Z-33Z-43Z-5Working widthmm1100190029003700Working depthmm100-200No.
  Contact Now
This subsoiler is an automatic agricultural machinery with various functions. Made up of frame, pole, plow share, soil separating board, leading bogie and strengthening tie bar. It can be installed on the left beam between the front and rear wheel. With adjustable ridge distance, automatic plow share and controllable depth; applicable for deep loosening of land and breaking up clods, matchable with seeding machine; with small turning radius, especially suitable for slope.
  Contact Now
Product Description 3Z cultivator is suitable for cultivating corn, cotton, soybean, sugar beet, etc. It can perform cultivating, ditching, riding, deep loosing, etc. The rotary cultivator can break the harden soil, loose soil, and keep theunderground water of soil, and clean the stubbleof crop. Thiscultivating machineis rational structure.
  Contact Now
Product descriptions from the supplierOverview PRODUCT DESCRIPTION                                    Farm equipment MF Tractor mounted Disc Plough 3 disc 26inch Disc Plow  is 3 point mounted with four-wheel tractors, the discs of plow are revolving to furrow the land during operation. This tube disc ploughis especially suitable for the land which have weeds, stems and frictional soil with small brick etc, and it has deep plowing 2
  Contact Now
This subsoiler is an automatic agricultural machinery with various functions. Made up of frame, pole, plow share, soil separating board, leading bogie and strengthening tie bar. It can be installed on the left beam between the front and rear wheel. With adjustable ridge distance, automatic plow share and controllable depth; applicable for deep loosening of land and breaking up clods, matchable with seeding machine; with small turning radius, especially suitable for slope.
  Contact Now
This subsoiler is an automatic agricultural machinery with various functions. Made up of frame, pole, plow share, soil separating board, leading bogie and strengthening tie bar. It can be installed on the left beam between the front and rear wheel. With adjustable ridge distance, automatic plow share and controllable depth; applicable for deep loosening of land and breaking up clods, matchable with seeding machine; with small turning radius, especially suitable for slope.
  Contact Now
3Z cultivator is suitable for cultivating corn, cotton, soybean, sugar beet, etc. It can perform cultivating,ditching,riding,deep loosing,etc.The rotary cultivator can break the harden soil, loose soil, and keep the underground water of soil, and clean the stubble of crop. This cultivating machine  is rational structure. It is safe, durable, and high efficiency.Modelunit3Z-23Z-33Z-43Z-5Working widthmm1100190029003700Working depthmm100-200No.
  Contact Now
This subsoiler is an automatic agricultural machinery with various functions. Made up of frame, pole, plow share, soil separating board, leading bogie and strengthening tie bar. It can be installed on the left beam between the front and rear wheel. With adjustable ridge distance, automatic plow share and controllable depth; applicable for deep loosening of land and breaking up clods, matchable with seeding machine; with small turning radius, especially suitable for slope.
  Contact Now
3Z cultivator is suitable for cultivating corn, cotton, soybean, sugar beet, etc. It can perform cultivating, ditching, riding, deep loosing, etc. The rotary cultivator can break the harden soil, loose soil, and keep the underground water of soil, and clean the stubble of crop. This cultivating machine  is rational structure. It is safe, durable, and high efficiency. Modelunit3Z-23Z-33Z-43Z-5Working widthmm1100190029003700Working depthmm100-200No.
  Contact Now
this rear mounted rotary mower is added the chain in the front and rear of the tractor rotary slasher to protect the worker. Driven by the 3 gear boxes to keep widely working width.
  Contact Now
this rear mounted rotary mower is the updated version from the type 9GX series.we add the chain in the front and rear of the tractor rotary slasher to protect the worker.
  Contact Now
This kinds of double axle farm trailer is used for 25-120hp 4-wheels tractor , Applicable for transporting various bulk cargoes in plains, mountains, wetlands, knap, rural area and highway ,with the feature of solid structure; beautiful, safe, reliable, durable.
  Contact Now
Install bridge bearings on the half shaft to attenuate vibration and protect the half shaft and other components.The half shaft (drive shaft) is subjected to alternating stresses such as torsion, shear, tension and compression, and impact, which can also cause torsional and bending vibrations of the drive shaft, resulting in additional stresses; Uneven stress distribution; There is sliding friction between the drive shaft neck and the bearing.The shaft that transfers torque between the half shaft gearbox reducer and the drive wheel (previously mostly solid, but due to the easier control of une
  Contact Now
The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.
  Contact Now
1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.
  Contact Now
1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.
  Contact Now
This kinds of double axle farm trailer is used for 25-120hp 4-wheels tractor , Applicable for transporting various bulk cargoes in plains, mountains, wetlands, knap, rural area and highway ,with the feature of solid structure; beautiful, safe, reliable, durable.
  Contact Now
1LF hydraulic reversible plow is mounted with four-wheel tractor; it is used for the loam,sand loam , cultivated and dry land ,it can finish the furrowing work in double way.Model1LF-3301LF-4301LF-5301LF-3351LF-4351LF-535Working   widthmm90012001500105014001750Working   depthmm220-270Number of   bottoms68106810Total   weightkg5807509506208001000Matched   powerhp507080557590LinkageThree-point   suspension II type ,hydraulic output(difunctional oil cylinder),oil   connection in 1/2” thread
  Contact Now
Relate News
I. Adjustment of tillage depth of deep ploughing plough:Generally speaking, the tillage depth of deep ploughs should not be less than 10cm. Rotary tiller matched with walking tractor can adjust the depth of cultivated land by changing the height of tail wheel. When adjusting, just turn the adjusting handle.The ploughing depth is controlled by the hydraulic system of the deep ploughing machine matched with the wheeled tractor.
(1)High hardness discs with 65Mn Spring steel material make perfect soil deep cultivating. (2)The plough discs are rotated during work, no entangle the grass and no block(3)Surface sprayed treatment, beautiful appearance, not easy to fade(4)Widely applications for cultivated or hard land, universally used for 60hp to 160hp tractors(5)Strong construction, big bolts and nuts, high quality spare parts, resonable design make this plough excellent work and long service life. 
The working part is a Rotary Tiller with 2 ~ 3 spiral cutters. During the operation, the Rotary Tiller rotates around the vertical axis and the cutter cuts the soil into pieces. The utility model is suitable for paddy field hydroponic cultivation, and has strong soil crushing and pulp action, but poor covering performance. Used more in Japan. In order to enhance the effect of Rototiller, various additional devices have been installed on the rototiller in some countries.
This 3QL series agriculture equipment furrow ridger gadget tractor ridger is suitable for ridging after the tillage in the farm area. It includes heavy duty tubular field body, the complete device is made a lot stronger than everyday ones. This ridger is suitable for ridging after the tillage inside the field for potato, beans, vegetable etc.It is convenient to regulate the ridging top and the ridging rows and space between every ridge. It could be effortlessly spaced (widened or narrowed) consistent with the crop requirement. The rubber tires may be moved without problems.
This 3QL series agriculture machinery furrow ridger machine tractor ridger is suitable for ridging after the tillage in the farm field. It consists of heavy duty tubular box frame, the whole machine is made much stronger than regular ones. This ridger is suitable for ridging after the tillage in the field for potato, beans, vegetable etc. It is convenient to adjust the ridging height and the ridging rows and space between each ridge. It can be easily spaced (widened or narrowed) according to the crop requirement. The rubber tires can be moved easily.
 5TY Series Corn Thresher, when working, the corn is fed by the feed mouth, the corn is hit in the high speed rotating rotor and the drum, the kernel is separated by the sieve hole, the corn core is discharged from the tail of the machine, the corn silk, the skin is discharged from the tuyere. The feed hole is arranged on the upper cover of the machine. The corn stick enters the threshing chamber through the feed hole. The corn grains are knocked off by the high-speed rotating rotor in the threshing chamber and separated through the sieve holes.
What is a disc plough used for?The disc plough is designed to work in all types of soil for functions such as soil breaking, soil raising, soil turning and soil mixing. It is used to open the new fields and to process the stony areas. It can be used easily at rocky and rooted areas.
Supplying high quality harrow and plough's spare parts, including discs, hubs, bearings, spacers, harrow shafts etc. We can also customize the parts according to sample or drawing. 
1. At the beginning of the work, the Rototiller should be in the state of lifting, first combined with the power output shaft, so that the rotation speed of the cutter shaft increased to the rated speed, and then decreased the Rototiller, so that the blade gradually buried to the required depth. It is forbidden to combine the blade with the power output shaft or down the Rototiller after the blade is buried, so as not to cause the blade to bend or break and increase the load of the tractor. 2.
Rotary tillage part is the most commonly used tillage part of micro-tiller, and the engine power drives the rotary tillage cutter shaft to rotate through the transmission device. Rotary tillage knife shaft is horizontally arranged, and several rotary tillage blades are arranged on the circumference of the knife shaft. The transmission of the knife shaft has two forms: middle transmission and side transmission.