عربى
русский
español
português
The unmarried axle farm trailer is used for 15-40hp 4-wheels tractor , relevant for transporting numerous bulk cargoes in plains, mountains, wetlands, knap, rural area and motorway ,with the function of solid structure; lovely, safe, reliable, durable.it's far protected in type: dumping trailer…
2022/10/09 16:41
This hydraulic offset heavy disc harrow is trailed for 90-180hp tractor.Very own hydraulic device to boost and down the shipping wheel freely.Excessive great of difunctional oil cylinder.Extensively operating width of this heavy disc harrow.
2022/10/09 16:47
It is a installed adverse mild disc harrow for 30-60hp.High performanceRobust capability of soil pulverizationThe tractor with out deflective trailed pressureThe operating depth of this established mild disk harrow can be adjusted freely though adjust the perspective between the disc body.
2022/10/09 16:36
During the operation of the automatic feeding corn thresher, the speed of the car must not be too fast or too slow, otherwise it is easy to block the feed inlet, feed evenly, such as uneven can lead to broken CORNCOB, low yield, plug.Troubleshooting: 1. the front hopper down rollers too close to…
2022/02/09 17:06
It's been around since 1805, when lawn mowers were manual and had no power support.In 1805, Plucknett, an Englishman, invented the first machine to harvest grain and cut weeds. People pushed the machine and drove the rotary knife to cut grass through gear transmission. This is the prototype of lawn…
2022/05/19 10:13
The working part is a Rotary Tiller with 2 ~ 3 spiral cutters. During the operation, the Rotary Tiller rotates around the vertical axis and the cutter cuts the soil into pieces. The utility model is suitable for paddy field hydroponic cultivation, and has strong soil crushing and pulp action, but…
2022/01/06 15:57
5TY Series Corn Thresher, when working, the corn is fed by the feed mouth, the corn is hit in the high speed rotating rotor and the drum, the kernel is separated by the sieve hole, the corn core is discharged from the tail of the machine, the corn silk, the skin is discharged from the tuyere. The…
2022/02/09 16:55
A chisel plough is capable of penetrate, split, and level soil even over rocky, hard, or wetland, unlike the normal plough.The chisel plough plays the initial loosening of the soil while leaving the trash on top.Not like the disc plough that reverts natural count number from constructing at the…
2021/11/29 15:59
1. At the beginning of the work, the Rototiller should be in the state of lifting, first combined with the power output shaft, so that the rotation speed of the cutter shaft increased to the rated speed, and then decreased the Rototiller, so that the blade gradually buried to the required depth. It…
2022/01/06 16:12
Rotary tillage part is the most commonly used tillage part of micro-tiller, and the engine power drives the rotary tillage cutter shaft to rotate through the transmission device. Rotary tillage knife shaft is horizontally arranged, and several rotary tillage blades are arranged on the circumference…
2021/12/09 16:52
I. Adjustment of tillage depth of deep ploughing plough:Generally speaking, the tillage depth of deep ploughs should not be less than 10cm. Rotary tiller matched with walking tractor can adjust the depth of cultivated land by changing the height of tail wheel. When adjusting, just turn the…
2021/12/09 15:32
What is a disc plough used for?The disc plough is designed to work in all types of soil for functions such as soil breaking, soil raising, soil turning and soil mixing. It is used to open the new fields and to process the stony areas. It can be used easily at rocky and rooted areas.
2021/12/02 08:42
Submitted successfully
We will contact you as soon as possible
Close